Webasto DBW 46 Wartungshandbuch PDF herunterladen (Seite 35)

9 Repair

BBW 46 / DBW 46

908

9.2.8 Replacement of Glow Plug

9.2.8.1 Removal

1. Remove heater (see 8.7.1.1).

2. Break electrical connections (see 9.2.1.1).

3. Pull wiring harness (2, Fig. 905) from glow plug (1).

4. Unscrew glow plug (1) from burner head (3).

5. Perform procedures on components after

disassembly (refer to 9.1.1).

9.2.8.2 Installation

NOTE

Observe remarks on glow plug replacement (see 9.1.1.3).

1. Apply Copaslip (Ident. No. 105898) or copper paste to

thread of glow plug.

2. Screw glow plug (1, Fig. 905) into burner head (3) and

torque with 30 Nm.

3. Plug wiring harness (2) onto glow plug (1).

4. Make electrical connections (see 9.2.1.2).

5. Install heater (see 8.7.1.2).

1 Glow plug

2 Wiring harness

3 Burner head

Fig. 905 Replacement of Glow Plug

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Keine Kommentare

Webasto DBW 46 Wartungshandbuch Seite 35